Table of Contents
- 1 What is Recovery Mode?
- 2 Recovery Mode Functions
- 3 Why Use Recovery Mode?
- 4 How to Enter Recovery Mode on Samsung Galaxy S23+
- 5 Method 1: Using Hardware Buttons
- 6 Method 2: Using ADB Commands from PC
- 7 Conclusion
Whatever phone you are using, you should know how to boot into recovery mode because it can be handy in many situations. Recovery mode can help you troubleshoot many problems especially when your phone is stuck on the Samsung logo. In this guide, we’ll explain different methods to open recovery mode on Samsung Galaxy S23+ step by step.
What is Recovery Mode?
It’s a special mode that provides you with a set of tools and options that go beyond what you usually see on your phone’s regular interface. Think of it as an emergency room for your device, where you can perform various tasks to fix issues, troubleshoot problems, and even perform maintenance tasks that aren’t accessible in normal mode.
Recovery Mode Functions
You might be thinking about what you can do in recovery mode if you haven’t used it before. Below is the list of functions:
- Reboot to bootloader
- Enter Fastboot
- Apply update from ADB
- Apply update from SD card
- Wipe data/factory reset
- Wipe cache partition
- Run graphics test
- Run locale test
- Reboot system now
- Power off
- Repair apps
Why Use Recovery Mode?
Sometimes your phone might act up, like getting stuck or not working smoothly, or maybe facing any of these problems:
- Boot looping
- Stop responding
- Poor performance
- Apps keep crashing
- The device is not opening
- Suspicious device activity
- Virus or malware infections
- Randomly reboots or restarts
- Shuts down without restarting
- Bluetooth, network, GPS, or camera issues
How to Enter Recovery Mode on Samsung Galaxy S23+
There are mainly two methods to boot into recovery mode in Samsung Galaxy S23+. We have explained both of them below:
Method 1: Using Hardware Buttons
Step 1: Turn Off Your Phone
Hold the power button and choose “Power Off” to turn off your phone.
Step 2: Hold the Volume Up Button
Now, press and hold the volume-up button on the side of your phone.
Step 3: Press the Power Button
While holding the volume up button, press and hold the power button.
You’ll see a special menu on your screen. Use the volume buttons to move around and the power button to select things.
Method 2: Using ADB Commands from PC
Step 1: Install ADB on Your Computer
ADB is the connection between a smartphone and a computer. You need to install ADB drivers to use this method.
Step 2: Turn On the USB Debugging
In your phone’s settings, find “Developer Options” and turn on “USB Debugging.” It’s like giving permission for your computer to talk to your phone.
Step 3: Connect Your Phone to the Computer
Plug your phone into your computer using a USB cable.
Step 4: Command to Enter Recovery Mode
Open the command prompt from the ADB folder on your computer and type the command: “adb reboot recovery.”
Recovery mode might sound complicated, but it’s like a hidden tool that can save your day when your phone gets moody. You can solve many problems like malware, storage issues, network problems, and even soft brick. So it is important to know how to enter recovery mode.